Round Non-Tapered Columns
We offer our Round Non-Tapered Columns in three different materials. Fiberglass, our most popular, Synthetic Stone, our lightweight stronger than stone alternative, and FRP, our lightest option. All of our options are available in any of the sizes listed below, and with several custom options available to fit your needs. Our columns also come standard with astragals as a time and money saving measure, if you would like these removed we can do so at no extra cost to you. Most of our round non-tapered columns come with a Tuscan Capital support ring (Item E in the diagram below) that is removable if another capital is desired. Columns 6 to 12 inches in diameter do not come with the Tuscan Capital support ring. Please note that our Structural Support chart translates best to our Fiberglass columns due to variances between polymer stone and FRP column thicknesses, however we would be more than happy to provide a specific shop drawing based on your material of choice. Please email or call us at 877-279-9993 with any questions.
|Column Diameter||Bottom Shaft Diameter||Top Shaft Diameter||Bead Width||Cut At Bead Loss||First Ring||Minimum Wall Thickness||Available Lengths (feet)|
*Columns 6″ to 12″ do not have a ring (E) above the astragal to hold a Tuscan Capital.
Columns to Surround Structural Supports
|Column Diameter||Inside Top Shaft Diameter(s)||Largest Round Support||Largest Square Support|
Please note that this chart is for our Fiberglass Columns. Our Synthetic (Polymer) Stone columns are usually a little thicker, and our FRP are usually a bit thinner. Usually the sizes can still match the support sizes as listed, as columns that surround structural supports are usually split for reassembly, and the chart is written with allowances for kerf. Split columns are no longer load bearing. Please bear in mind decorative capitals have a much smaller inside diameter and therefore this chart is not applicable for them. To insure that your column fits as intended please let us know ahead of time the shape and size of the structural support to be encased. When a non-split column is ordered it is assumed it will not be surrounding a structural support, therefore if this is indeed the intention please let us know at the time of order the size of the structural support to be encased. Our FRP Columns come pre-split as they are intended for wrapping purposes, although we will be happy to assemble them at the time of production. Please be aware they will not be able to carry nearly as much weight as our Fiberglass or Synthetic (Polymer) Stone columns and are not intended to be load bearing.
Fiberglass and Synthetic (Polymer) Stone Load Bearing Specifications
|Column Diameter||Load (Max in LBS.)|